Whirlpool System type Magic a bubbly experience thanks to champagne base jets With the Magic type system, your favourite bath gets a combination of a Hydra-Jet massage system with 5 jet nozzles arranged in the side of the bathtub, and in total 8 micro-jet nozzles which - depending on bathtub model) are arranged in the base and at the back and foot region of the bathtub, along with an air system with 10-12 champagne jets (depending on bathtub model) in the base of the bathtub. Pre-heated air flows into the bathtub via the champagne jets in the base along with individually mixed water. Tiny air bubbles are swirled around via water jets, resulting in an especially tingling and relaxing sensation for your body. Both systems can be operated independently of each other. The air system is electronically controlled, infinitely variable, and has an interval feature. The two-way valve controls the massage effect from the champagne jets by mixing water, air, or water and air combined. An integrated underwater spotlight with an interval feature ensures a quite special experience. This system is controlled by an electronic button that is recessed in the edge of the bathtub. A rotating control panel is also available as an accessory. The air regulator manages the intensity of the massage jet by mixing the air. The integrated dry run protection prevents operation of the massage pump without water. Residual water draining takes place via the whirlpool pump and the system. Automatic follow-up drying of the air ducts takes place after the bathwater is emptied. The Magic whirlpool system is fully installed in your desired bathtub and is then immediately ready for connection. A drain set and overflow set also comes with this whirlpool system. The arrangement of jets, nozzles, and operating elements depends on the model. As soon as the whirlpool is built in, then an inspection opening must be provided in the aggregate when installing the whirlpool.